Console commands for customizing the mouse in CS: GO

Sensor Sensitivity Settings

• m_rawinput (0.1) – the command turns on/off raw input. 1 (default) turns on raw input. In this case the input is done with the mouse and the OS settings (acceleration, delay, sensitivity, reverse, etc) are ignored as the game settings are applied.
• sensitivity (0.0001 - 10000000) – this command helps to change the mouse sensitivity. The setting is used in wide scale, however, it is more often used in the range 1.5-4.
• m_yaw – the command sets the sensitivity of the mouse in the X-axis (left-right movement). 0.022 is default. 1 has very high sensitivity, 0.001 is the lowest sensitivity.
• m_pitch – changes the sensitivity Y-axis (up-down movement). 0.022 is default. 1 has very high sensitivity. 0.001 is the lowest sensitivity.

The command m_pitch makes it possible to set the reverse of mouse movement in the Y-axis. To do it, you need to enter m_pitch -0.022. Also the reverse may be turned on in the game settings:

Recommend to read:

• CSGO unlimited time command – the guide about cheats to increase the round time in a match;
• CSGO WallHack command – console commands for viewing through walls;
• CSGO aimbot command – everything about ranks and titles in the game.

Mouse Acceleration Settings

This group of the parameters is a bit difficult for understanding and is hardly ever used by players. Let us describe the settings:

• m_customaccel (0/1/2/3) – the command turns one several options of acceleration.

0 – acceleration is turned off (default)

1 – max acceleration. The faster you move the mouse (in any direction), the faster the camera moves

2 – the mode of acceleration in X-axis and Y-axis that can be scaled depending on the sensitivity settings m_yaw и m_pitch

3 – in this setting, acceleration will depend on the sensitivity settings. The more sensitivity is, the higher acceleration effect is.

• m_customaccel_exponent (0-6) – sets the speed that is necessary to move the mouse for the set acceleration to work (if it is on by the corresponding commands). The higher the size of the command is, the faster acceleration is activated.

1.05 – default

3 – your mouse will be moving faster than usual

0.5 – the mouse moves slowlier than usual.

• m_customaccel_max – the command sets the limit of acceleration. 0 is default (acceleration is not limited). The setting of the team is not limited but it sets the limit of mouse movement that restricts acceleration. If you use acceleration, we recommend you to experiment with this parameter to prevent very abrupt movements of the camera.
• m_customaccel_scale – the command sets the scale of acceleration build-up. The higher this parameter is, the more acceleration is built-up.

0.04 – default

0 – turns off acceleration (as the scale of the build-up is zero), even if it is off with the command m_customaccel

1 – this parameter turns on very fast acceleration

• m_mouseaccel1 (1/0) – turns on/off mouse acceleration to double speed of the movement. Default is 0
• m_mouseaccel2 (1/0) – turns on/off the initial acceleration of the mouse up to four-time speed of the movement. Default is 0
• m_mousespeed(1/2/3) – uses the acceleration parameters set in Windows

0 – turn off Windows acceleration (default)

1 – using Windows acceleration and initial parameter set by the command m_mouseaccel1

2 – using Windows acceleration and initial parameters set by the command m_mouseaccel2

Other Commands

• m_forward(0,0001 до 1000) – parameter that is in charge of the mouse turns while moving forward-backward. Default setting is 1
• m_side – parameter of dislocation while mouse reversing. Default setting is 0.8